IC693PWR321S GE

Description

Product Specifications

Parameter	Value
Input Voltage	120/240 VAC (50/60 Hz)
Output Voltage	24 VDC ±5%
Maximum Output Current	3 A
Efficiency	89% at full load
Isolation Rating	3 kV RMS between input and output
Temperature Range	-20°C to 70°C (-4°F to 158°F)
Dimensions	102 mm × 114 mm × 51 mm (4.0″ × 4.5″ × 2.0″)
Compatibility	GE Fanuc Series 90 – 30 PLC racks, compatible with IC693PWR322S (redundant)

IC693PWR321S

Key Advantages and Features

1. Dual – Voltage Flexibility
   • Supports both 120 VAC and 240 VAC inputs, eliminating the need for voltage converters in global installations.
2. High Reliability
   • Built – in overvoltage and short – circuit protection ensures safe operation.
   • MTBF of 150,000 hours, tested under GE’s 严苛 environmental standards.
3. Space – Saving Design
   • Occupies a single slot in the PLC rack, maximizing space utilization in control panels.
4. Wide Operating Range
   • Maintains stable output voltage even with input voltage fluctuations of ±15%.

Applications and Use Cases

• Manufacturing: Powering robotic controllers and conveyor systems.
• Energy: Providing backup power to critical sensors in wind turbines.
• Water Treatment: Powering pumps and valves in remote monitoring stations.

Competitive Edge

• Cost – Efficient: Offers 10% higher power density compared to similar modules.
• Certifications: Meets UL 508, CE, and IEC 61131 – 2 safety standards.
• Redundancy Option: Can be paired with the IC693PWR322S for dual – power configurations.
  

  IC693PWR321S

Selection Guide

1. Power Requirements:
   • Choose the IC693PWR321S for 3 A output; upgrade to the IC693PWR331S for 5 A.
   • Verify total system power consumption to avoid overload.
2. Environmental Conditions:
   • For extreme temperatures (-40°C to 85°C), select the IC693PWR321SR variant.
   • Ensure proper airflow if installed in enclosed cabinets.
3. Budget Considerations:
   • Refurbished units with a 1 – year warranty are available at a 25% discount.
   • Combine with the IC693CHS001 rack for a complete power distribution solution.

Installation and Maintenance Tips

1. Installation:
   • Use stranded copper wires (18 – 22 AWG) for input/output connections.
   • Ground the module to prevent electrostatic discharge.
2. Troubleshooting:
   • Check the LED indicator: green = normal operation, red = fault.
   • Replace the module if output voltage deviates by more than ±10%.
3. Safety:
   • Disconnect power before replacing the module.
   • Follow NEC Article 725 for low – voltage power systems.