IC660EBR101

Description

1. Product Description

2. Product Parameters

3. Advantages and Features

• High – Speed Data Transfer: With a data transfer rate of up to 100 Mbps, the IC660EBR101 can quickly transmit large amounts of data between network segments. This allows for real – time control and monitoring of industrial processes. For example, in a large – scale manufacturing plant, it can transfer production data from multiple sensors to the central control system without significant delay.
• Protocol Compatibility: It supports multiple communication protocols, including TCP/IP, UDP, and Modbus/TCP. This makes it highly versatile, as it can connect devices with different protocol requirements. For instance, it can bridge the communication between a legacy device using Modbus/TCP and a modern device using TCP/IP.
• Reliability: Built to operate in a temperature range of – 20°C to 60°C and withstand electrical noise and mechanical vibrations, the IC660EBR101 has a mean time between failures (MTBF) of over 90,000 hours. This high reliability ensures continuous operation of the industrial network, minimizing downtime and maintenance costs.
• Network Segmentation: The ability to segment different Ethernet networks helps in improving network security and performance. It can isolate different parts of the network, preventing the spread of network faults and reducing network congestion.

4. Application Areas and Application Cases

• Application Areas: The IC660EBR101 is widely used in various industries, such as manufacturing, energy, transportation, and water treatment. In manufacturing, it can be used to connect different production lines and control systems. In the energy sector, it can facilitate communication between power generation equipment and monitoring centers.
• Application Case: In an automotive manufacturing plant, the IC660EBR101 was used to connect the robotic assembly lines with the central control system. The robotic lines used different communication protocols, and the IC660EBR101 successfully bridged the communication gap. The high – speed data transfer ensured that the control system could receive real – time feedback from the robots, allowing for precise control of the assembly process. As a result, the production efficiency was significantly improved, and the defect rate was reduced.

5. Competing Product Comparison

6. Selection Suggestions

• Data Transfer Requirements: Evaluate the amount of data that needs to be transferred between network segments. If you have a high – volume data transfer requirement, the high – speed data transfer capability of the IC660EBR101 may be a good fit.
• Protocol Compatibility: Consider the communication protocols used by the devices in your automation system. The IC660EBR101’s support for multiple protocols makes it suitable for systems with diverse protocol requirements.
• Operating Environment: Take into account the temperature, humidity, and electrical noise level of the installation environment. The IC660EBR101’s wide operating temperature range and high resistance to electrical noise make it suitable for harsh industrial environments.
• Budget: While the IC660EBR101 offers high – quality performance, it is important to consider your budget. Compare the cost – performance ratio of different products before making a decision.

7. Precautions

• Installation: Follow the installation instructions provided in the product manual carefully. Ensure proper grounding and wiring to prevent electrical interference and ensure reliable operation.
• Operating Environment: Keep the IC660EBR101 within its specified operating temperature range of – 20°C to 60°C. Avoid exposing it to extreme humidity, dust, or corrosive substances.
• Maintenance: Regularly inspect the Ethernet bridge for any signs of damage or wear. Check the connections and clean the components if necessary. Replace any faulty parts immediately to ensure the continued reliability of the network.