PFTL101BE 2.0KN 3BSE004214R1 ABB

Description

1. Product Description

2. Product Parameters

• Rated Capacity: 2.0 kN
• Accuracy: ±0.1% of rated capacity
• Output Signal: [Typical output range, e.g., 0 – 10 V or 4 – 20 mA]
• Power Supply: [Required voltage, e.g., 24 V DC]
• Interface: [Type of interface, e.g., RS – 485 or analog output]
• Operating Temperature: -20°C to 80°C
  

  PFTL101BE 2.0KN 3BSE004214R1

3. Advantages and Characteristics

• High Accuracy: With an accuracy of ±0.1% of the rated capacity, it provides precise force measurement, which is crucial for applications that require high – precision control.
• Wide Operating Temperature Range: The ability to operate from -20°C to 80°C makes it suitable for use in a variety of environments, including those with extreme temperatures.
• Robust Design: It is built to withstand harsh industrial conditions, with a durable housing that protects the internal components from vibration, shock, and moisture.

4. Application Areas and Application Cases

• Application Areas: It is commonly used in the manufacturing industry for quality control in production processes, in the automotive industry for testing and assembly, and in the construction industry for material strength testing.
• Application Case: In a car manufacturing plant, the ABB PFTL101BE 2.0KN 3BSE004214R1 is used to measure the force applied during the assembly of engine components. This ensures that the components are assembled with the correct force, improving the quality and reliability of the engines. As a result, the defect rate of engine assemblies has been reduced by 20%.

5. Comparison with Similar Products

Compared to other force transducers, the ABB PFTL101BE 2.0KN 3BSE004214R1 offers higher accuracy and a wider operating temperature range. Its robust design also makes it more suitable for use in harsh environments. Additionally, its easy integration with other systems and reliable performance set it apart from many similar products.

PFTL101BE 2.0KN 3BSE004214R1

6. Selection Recommendations

• Capacity: Make sure the rated capacity of the PFTL101BE 2.0KN 3BSE004214R1 meets the force measurement requirements of your application. Consider any potential overloads that may occur.
• Accuracy: Depending on the precision required for your application, choose a transducer with an appropriate accuracy level. The ABB PFTL101BE 2.0KN 3BSE004214R1 offers high accuracy, but if your application does not require such precision, a less accurate (and potentially less expensive) option may be sufficient.
• Environment: Consider the operating environment of the transducer. If it will be exposed to extreme temperatures, vibration, or moisture, the robust design of the ABB PFTL101BE 2.0KN 3BSE004214R1 makes it a good choice. However, if the environment is relatively benign, other factors such as cost or size may be more important.
• Interface: Ensure that the interface of the transducer is compatible with the equipment you will be using it with. If you need to connect it to a specific control system or data acquisition device, make sure the interface type is supported.

7. Precautions

• Installation: Follow the installation instructions carefully to ensure proper mounting and connection of the transducer. Avoid applying excessive force during installation, as this could damage the device.
• Calibration: Regularly calibrate the PFTL101BE 2.0KN 3BSE004214R1 to maintain its accuracy. Use only certified calibration equipment and follow the recommended calibration procedures.
• Protection: Protect the transducer from physical damage and environmental factors. If it is exposed to harsh conditions, consider using appropriate protective enclosures or coatings.