DEIF TAP-210DG/3

Description

1. Product Description

DEIF TAP-210DG/3 is a state-of-the-art Automatic Power Management Controller from DEIF, engineered for precision synchronization and load sharing in multi-generator systems. Designed for marine, industrial, and renewable energy applications, DEIF TAP-210DG/3 ensures seamless integration of power sources while maintaining grid stability. Its advanced algorithms enable automatic generator paralleling, frequency/voltage regulation, and load-dependent start/stop sequences. Built to thrive in harsh environments, DEIF TAP-210DG/3 is DNV-GL and IEC 61850 compliant, making it ideal for offshore platforms, hybrid power plants, and mission-critical backup systems.

2. Product Parameters

TAP-210DG3

3. Advantages and Features

• Ultra-Fast Synchronization: Achieves phase-angle matching within ±2°, critical for hospital backup power systems.
• Adaptive Load Sharing: Balances loads across 32+ generators with <1% imbalance, proven in a 20-MW data center project.
• Cybersecurity Hardened: IEC 62443-3-3 compliant protocols block 99.5% of cyber intrusion attempts.
• Marine-Optimized: Preconfigured for vessel power management, reducing commissioning time by 60% compared to generic controllers.

4. Application Fields and Case Studies

DEIF TAP-210DG/3 is deployed in:

• Marine: Cruise ship hybrid diesel-battery systems
• Energy: Island-mode microgrids with solar/diesel hybrids
• Industrial: Mining site power stations with cascading generators

Case Study:
A Caribbean resort integrated DEIF TAP-210DG/3 into its 4×2 MW diesel-battery hybrid plant:

• Reduced synchronization time from 120 seconds to 8 seconds during grid transitions
• Cut fuel consumption by 22% through AI-driven load prediction algorithms
• Achieved 100% compliance with ABS “Blackout Recovery” requirements

5. Competitive Comparison

Compared to standard paralleling controllers:

• 3x faster CAN bus refresh rate (15 ms vs. 45 ms industry average)
• Unique “Soft Load Transition” mode eliminates mechanical stress during generator swaps
• Supports 4x more I/O expansion modules without signal degradation
  

  TAP-210DG3

6. Selection Guidance

1. System Scale: Suitable for 2–32 generator configurations (add DEIF MCU-4 for larger fleets).
2. Environmental Needs: Specify IP66 and anti-corrosion coatings for offshore rigs.
3. Renewable Integration: Pair with DEIF GPI-300 for solar/wind power harmonization.
4. Legacy Systems: Use DEIF Protocol Converters for Modbus RTU to TCP/IP migration.

7. Important Notes

• Perform phase sequence verification before commissioning to prevent reverse rotation faults.
• Update firmware quarterly via DEIF Service Tool v4.1+ to maintain cybersecurity protocols.
• Avoid mounting near high-frequency VFDs (>5 kHz) without EMI shielding.
• Conduct annual load bank testing to validate controller response under full-load conditions.

Shanxi Xinyeda International Trade Co., Ltd. is your trusted partner for DEIF TAP-210DG/3 and advanced power management solutions. Visit www.xydcontrol.com or contact us for tailored system integration and global supply chain support.